Super Io Configuration - ASROCK SBC-230D User Manual

3.3.4 Super IO Configuration

Serial Port1
Use this to enable or disable COM1.
Type Select
Use this to set parameters of COM1. Select COM1 port type: [RS232],
[RS422] or [RS485].
Serial Port2
Use this to set parameters of COM2.
Serial Port3
Use this to set parameters of COM3.
Serial Port4
Use this to set parameters of COM4.
COM Port IQR Mode
Use this set COM port IQR mode.
WDT Timeout Reset
This allows users to enable/disable the Watch Dog Timer timeout to reset
system. The default value is [Disabled].
28