Installation Of Memory Modules (So-Dimm) - ASROCK SBC-230D User Manual

2.3 Installation of Memory Modules (SO-DIMM)

SBC-230-WT / SBC-230D / SBC-230L / SBC-E230 / SBC-230J provides two 204-
pin DDR3 (Double Data Rate 3) SO-DIMM slots.
Step 1. Align a SO-DIMM on the slot such that the notch on the SO-DIMM
matches the break on the slot.
The SO-DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at
incorrect orientation.
Step 2. Firmly insert the SO-DIMM into the slot until the retaining clips at both
ends fully snap back in place and the SO-DIMM is properly seated.
12