Cool'n'quiet Driver; Usb 2.0 Driver - Abit AN52S User Manual

3.4 Cool'n'Quiet Driver

To install this program:
1. Click on the [Drivers] tab in the
installation menu screen.
2. Click the [Cool'n'Quiet Driver] item.
The installation screen appears.
3. Follow the prompts on the screen to
complete installation.
4. Restart the system for the driver to
take effect.
5. After the system restarted, open the
"Power Options" from the control panel
and choose the power scheme "Minimal
Power Management" to enable Cool 'n'
Quiet.
For Windows 2000 or ME system,
※
an AMD Cool 'n' Quiet tab will
appear under "Power Options"
when the Cool 'n' Quiet software
for Windows 2000 and ME is
installed. This must be set to
"Automatic Mode" for Cool 'n'
Quiet to be enabled.

3.5 USB 2.0 Driver

There is no need to install this driver for Windows 2000 with Service Pack 4,
※
Windows XP with Service Pack 1, or their later version.
3-24 AN52S/AN52