Video Mail - JVC GZ-VX855 Detailed User Manual

Using Wi-Fi by Creating a QR Code
8
DETECT/MAIL detection standby
Detection is suspended for the first 5 seconds.
0
9
DETECT/MAIL detection in progress (an e-mail is automatically sent out
after detection is completed)
The "PHOTO" icon appears on the screen for about 2 seconds upon
0
detection.
Images are captured automatically when moving subjects or human
0
faces appear on the camera's screen. (The PHOTO icon appears on
the screen upon detection.)
The captured still images will be sent via e-mail to the selected
0
recipients.
10
Detection suspended
Until the next detection is made, detection is suspended for the pre-
0
set length of time.
"DETECTION INTERVAL" can be selected from 15 seconds, 1
0
minute, 3 minutes, 10 minutes, 30 minutes and 60 minutes.
"Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)" (A p. 163)
Check the incoming e-mail.
214

VIDEO MAIL

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Memo :
Perform operations in step 2 and 3 after creating a QR code, and read the
0
QR code one by one by the camera.
Enter values in the required items for setting the recipient's
o
e-mail address.
E-mail address: set the recipient's e-mail address.
0
E-mail function: set the function of the e-mail that is transmitted to the
0
recipient's e-mail address.
Up to 8 e-mail addresses can be set.
0
Start reading from (1) if multiple e-mail addresses are set. Click the number
0
or "<", ">".
Enter values in the required items for setting the sender's
o
e-mail address.
E-mail address: set the sender's e-mail address.
0
Enter values in the required items for setting the e-mail
o
server (SMTP server).
SMTP server: set the name of the e-mail server (SMTP server) from which
0
an e-mail account is obtained.
SMTP port number: set according to the condition when the e-mail
0
account is obtained. Normally set to "25".
SMTP authentication method: set according to the condition when the e-
0
mail account is obtained.
User name: set if the SMTP authentication method is set to other than
0
"None". (same as the registered user name (account name) when the e-
mail account is obtained)
Password: set if the SMTP authentication method is set to other than
0
"None". (same as the registered password when the e-mail account is
obtained)
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap 1 on the lower right of the screen.
(Operation on this camera)