Panasonic CF-T5 Service Manual page 45

The fingernail in four places is inserted
PANASONIC LABEL PANASONIC LABEL
ANTENNA COVER
Insertion
SIMM COVER WAN
ANTENNA COVER
9.3.2.19. Assembly of the Hinge Cover (L), (R)
The order of tightening screw:a b
Screw DRHM0076ZA
Screw
Screw
Safety work
The cable is processed under the axis .
It is confirmed that the cable does not narrow
between cabinets.
Refer to Figure 1
SPACER CU
ANTENNA COVER is affixed and SPACER CU is
affixed on the boss before the installation
a
TP cable
b
Hinge Cover L
Engages with LCD FRONT
goods which have prepared
LCD REAR
Refer to Figure 2 Refer to Figure 2
Lock engagement
Multiply the fingernail
in 16 all places surely
Hinge Cover R Screw
Screw
a
b
Safety work
The cable is processed under
the axis . It is confirmed that
the cable does not narrow
between cabinets.
The TP cable passes on the axis
45
Cable drawing out route
Safety work
The LCD signal line is
drawn out between
wearing FRONT and REAR
Safety work
The touch panel cable is
drawn out between
FRONT and HINGE.
Cable drawing out route
Safety work
The cable is drawn out
between FRONT and REAR.
Hinge cover installation OK figure
The cover externals and the
Front rib are parallel
(agreement).
Hinge cover installation NG figure
The cover externals are not
parallel to the Front rib.
Inclines.