Panasonic CF-T5 Service Manual page 28

9.2.11. Removing the MODEM
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.8. first.
1. Remove the 2 screws (O).
Screw (O) : DXQT2+D25FNL (N8)
2. Remove the MODEM from main board connector
(CN18) as vertical.
Screw (O)
Modem
CN18
9.2.12. Removing the Card Bus Ejector
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.8. first.
1. Remove the 1 screw (P) from connection side of
wireless LAN.
Screw (P) : DFHE5025XA (N1)
Main Board
Screw (O)
Screw (Q)
28
2.Turn to the card bus ejector side.
3. Remove the 2 hooks (G) from the connector
(CN14).
CN14
9.2.13. Removing the LCD Unit
Preparation : perform the section 9.2.1., 9.2.2.
and 9.2.4. first.
1. Remove the 2 screws (Q).
Screw (Q) : DXQT26+D5FNL (N13)
2. Remove the LCD cable from the connector (CN11)
of the main board.
3. Remove the inverter cable from the connector
(CN10).
4. Disconnect the connectors (CN603, CN28) of the
main board.
Screw (Q)
LCD Cable
CN603
CN10
CN11
Card Bus Ejector
Hook (G)
Main Board
Screw (Q)
CN28