Advertisement
Parts List: 110-3PT-17N-XL (5303142)
* *: Available ONLY in complete assembly
Back Rack Assembly
(5277359)
Refer to the boom parts list
next page for part numbers.
NOTE:
Assembly of opposite end is similar to this end.
Bolt (Ref. #1.9) goes through the yoke on the outer boom(s), then through
Ref. # 1.7 and 1.8, followed with jam locknut (Ref. # 1.10).
For the eyebolt, thread the first nut (Ref. # 1.13) onto the eyebolt, then feed it
through the hole in the angle under the lower center section. Use the next nut
for adjusting and the first nut for locking the eyebolt into position.
Page 9
Advertisement
