Advertisement
Quick Links
Model: 110-3PT-BL
(5303083)
(110 Gallon 3-Point Sprayer
w/Boom-Buster 'Boomless' Boom Assembly
& Handgun)
(Pump & Coupler Included)
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your
3 Point sprayer.
Retain a copy of your receipt for your unit, as it will be required
to validate any warranty service.
Warranted against manufacturer or workmanship defects from
date of purchase with copy of receipt:
Homeowner Usage: One Year
Commercial Usage: 90 Days.
OWNER'S MANUAL
Category I or II
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST
If you should have a question or experience a problem with
your Fimco Industries Product: Visit our website @
www.fimcoindustries.com or call the Toll free number above. Our
technical support representatives will be happy to help you.
In most cases a customer service rep. can resolve
To obtain prompt, efficient service, always remember to give the
• Correct Part Description and/or part number
• Model number and Serial Number
Part descriptions and numbers can be obtained from the
illustrated parts list section(s) of this manual.
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5195386
the problem over the phone.
following information....
(09/20)]
Page 1
Advertisement
Related Manuals for Fimco 110-3PT-BL
Summary of Contents for Fimco 110-3PT-BL
- Page 1 Part descriptions and numbers can be obtained from the illustrated parts list section(s) of this manual. Commercial Usage: 90 Days. www.fimcoindustries.com 1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049 Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 [5195386 (09/20)]...
- Page 2 Slide a hose clamp on to the bypass hose (from the relief valve), then with a twisting motion, slip the bypass hose over the fitting on the bottom of the tank. Slide the hose clamp to the end of the hose and secure.
- Page 3 Boom Assembly Instructions Attach the boom buster bracket to the telescoping brackets, using the two square u-bolts and 4 whiz nuts. The telescoping brackets are already mounted to the 3-point frame. Slide the boom buster subassembly onto the boom buster bracket.
-
Page 4: Operation
Information About the Sprayer Determining the proper speed of the pulling vehicle can be done by marking off 100, 200 & 300 feet. The speed chart indicates the num- Roller pumps are positive displacement pumps, which means that ber of seconds it takes to travel the distances. Set the throttle and the entire solution being pumped must go somewhere or the pump with a running start, travel the distances. - Page 5 Boomless spray nozzles are great for rough terrains, road side spraying, fence rows and other areas that are difficult to apply with a traditional boom. Gallons per Acre GAL/1000 Sq. Ft. Swath BROADCAST & TURF APPLICATIONS Width (Ft) @ 40 PSI Thread XT Model 0.32...
- Page 6 Refill the tank about half full with some components of your sprayer plain water and use FIMCO Tank Neutralizer and Cleaner and repeat *** Insure that this connection point will not allow the roller pump to...
- Page 7 1/2” NPT (F) Spray Line Connection 3/4” NPT (F) Continuous By-Pass Connection Valves may be connected w/close nipples for multiple section spray control Description Fimco # Mfg. Part # Directo-Valve (AA6B) 5143316 AA6B Repair Kit, Items Marked * *...
-
Page 8: Exploded View
Detail A Detail B See Detail B Detail C See Detail A IN to Pump Exploded View: 110-3PT-BL See Detail C (5303083) Refer to the parts list next page for part numbers. Page 8... - Page 9 Parts List: 110-3PT-BL (5303083) Cast Iron 6-Roller Pump Assembly (#5271706) (Hypro Mfg. Part # 6500C) * * = Available ONLY in Repair Parts Kit #7771795 (3430-0380) Consists of Rollers, O-Ring & Viton Seals ♦ ♦ Available ONLY in Complete Assembly...
-
Page 10: Troubleshooting
Roller Pump General Safety Information Use a pressure relief device on the discharge side of the Disconnect power before servicing. pump to prevent damage from pressure buildup when the 10. Release all pressure within the system before servicing any pump discharge is blocked or otherwise closed and the pow- component. - Page 11 Dimensions 62.563” 44.000” 30.000” 50.313” 8.938” 37.750” 41.000” NOTES: Page 11...
-
Page 12: Warranty
WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco, Inc. shall, at its own cost, and at its option, either repair or replace the defective Equipment or part.