Troubleshooting; Handling And Storage - BorMann Pro BBP2200 Manual

EN

Troubleshooting

Problem
Unit does not start
The battery will not charge
Important: Please note, all repairs/service should be carried out by a qualified person.

Handling and Storage

Care must be taken when handling this product.
Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This product is not a toy and must be respected.
Environmental conditions can have a detrimental effect on this product if neglected.
Exposure to damp air can gradually corrode components.
If the product is unprotected from dust and debris, components will become clogged.
If not cleaned and maintained correctly or regularly the machine will not perform at its best.
Disposal
At the end of the machine's working life or when it can no longer be repaired, ensure that it is disposed of according to national regulations.
— Contact your local authority for details of collection schemes in your area.
In all circumstances:
• DO not dispose Of power tools with domestic waste.
• DO not incinerate.
• Do not dispose of as unsorted municipal waste.
Warning!
• Do not put battery pack in fire or mutilate; cells may burst or release toxic materials.
• Do not short circuit cells, may cause burns.
• The battery pack must be removed from the appliance before it is scrapped.
• The battery pack is to be disposed of safely.
• Do not mutilate batteries; corrosive electrolyte will be released.
• Do not dispose of batteries or cells in a charged condition.
Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or legislation. They should be returned to your local warranty
agent/stockist.
5
Possible Cause
Battery not installed properly
The battery is not charged
The battery is not inserted to the charger
The charger is not connected to the socket
The air temperature is too high or too low
WWW.BORMANNTOOLS.COM
Remedy
Check battery installation
Check battery charging requirements
Connect the battery to the charger
Connect the charger into a working outlet.
Check current at receptacle by plugging in a lamp or other
appliance
Check whether receptacle is connected to a light switch which
turns power off when you turn out the lights
Attempt to charge the battery in a room where the surrounding
air temperature is above 4,5 oC or below + 40,5 oC