1
Input "+++"
2
Check "<E>" response
3
Input "<WI192.168.11.3>"
4
Check "<S>" response
5
Input "<RI>"
6
Check "<S192.168.11.3>" response
7
Input "<WR>"
8
Check "<S>" response
9
Module re-booting
Above process is shown in the serial console as below figure.
WIZ1000 Ver.01.00
>Config socket : OK
>Listen : OK
<E><S><S192.168.11.3><S>
WIZ1000 Ver. 01.00
>Config socket : OK
>Listen : OK
Copyright © WIZnet All Rights Reserved
Table 8. Serial Configuration Testing Process
Figure 15 Serial Configuration Console Display
Enter Serial Configuration mode
Successfully entered
Change the IP address to 192.168.11.3
Sucessfully change the IP address
Check IP address of the module
Check changed IP address
Re-boot
Successfully re-booted
WIZ1000 | 29 page