Select the
MAC address of which configuration value should be changed in the "Board list.
①
The values configured will be displayed.
Change the value
②
Click "Setting" button. The configuration change will be complete.
③
The module will be initialized to the changed
④
⑤ To check configuration result, click 'Search' button.
ⓟ
Upload
Firmware will be uploaded through network
☞ After uploading the firmware, 20~30 seconds are required for initialization.
ⓠ
Exit :
Close the configuration tool program.
Copyright © WIZnet All Rights Reserved
values (re-booting is processed)
WIZ1000 | 17 page