Wiznet WIZ1000-EU User Manual page 26

Command Code
Command Parameter
WI xxx.xxx.xxx.xxx (eg. 192.168.11.133)
WS xxx.xxx.xxx.xxx (eg. 255.255.255.0)
WG xxx.xxx.xxx.xxx (eg. 192.168.11.1)
WP 0~65535
WD 0 : Static, 1 : DHCP, 2 : PPPoE
WM 0 :TCP Client, 1 :TCP Mixed, 2 :TCP Server
WK 0 : TCP, 1 : UDP
XXXX
eg. [Baudrate]1: 115200, 2: 57600,
3: 38400, 4: 19200, 5: 9600,
WB 6: 4800, 7: 2400,8: 1200
[data byte] 7 : 7bit, 8bit
[parity] 0 : no parity, 1 : Odd, 2 :Even
[Flow] 0 : no, 1 : Xon/Xoff, 2 :RTS/CTS
WT 0 : Disable, 1 : Enable
WU 0 : Not Use, 1 : Use
WE xxxxxx (eg. In hex format : 2B 2B 2B)
WX xxx.xxx.xxx.xxx (eg. 192.168.11.144)
WN 0~65535
WR
WV xxx.xxx.xxx.xxx (eg. 255.255.255.0)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
WW
(eg. wiznet.co.kr)
WY PPPoE ID
WZ PPPoE Password
OC XX
OS 0~255
OT 0~65535
OI 0~65535
RA MAC Address
RU 0 : Not Use, 1 : Use
RV IP address
RW Domain
Copyright © WIZnet All Rights Reserved
Comments
Set Local IP
Set Subnet mask
Set Gateway
Set Local IP's port number
Set the IP configuration method
Set the TCP operation mode
Set Protocol(TCP or UDP)
Set the serial baud rate, data, parity
and flow control.
4bytes:[Baud][data byte][parity][flow]
Set the serial command method
DNS Use or not
Set the command mode character
Set server IP address
Set server port number
Restart
DNS IP Setting
Domain Setting
PPPoE ID Setting
PPPoE Password Setting
Set delimiter character in hex
Set delimiter size
Set delimiter time
Set Inactivity timer value
Get MAC Address
Check DNS Use or Not
DNS IP Check
Domain Check
WIZ1000 | 26 page