Tools You Will Need - LG Signature OLED77W7 Series Manual

Hide thumbs Also See for Signature OLED77W7 Series:

Manual (56 pages)

Table Of Contents

Table of Contents

(Only OLED65/77W7T, OLED65/77W7V,

OLED65/77W7Y)

Provided item

Wall mount

Wall mounting screw

Ø5 x L65

Wall mounting screw for wood

Ø3 x L18

• Check the material of the wall and the thickness of the finishing.

• Use the Wall mount anchor for wall material of concrete, light

concrete, strong natural stone, soft natural stone masonry brick and

hallow block that do not crack.

Wall Material

Tools

Concrete

Wall mounting

Brick

anchor, Wall

mounting screw,

Natural stone

Ø 3/6/8 mm Drill bit

Metal Panel

Plywood

Wall mounting

EPS Panel

screw, Ø 1.8 mm

Plasterboard +

Drill bit

Plywood

• When installing on a gypsum board or medium-density fiberboard

(MDF) wall, fasten the screws to the studs that support the wall. If

there are no studs, check the distance from the inner wall before

installing.

- 30 mm or below: Install directly on the inner wall using a 65 mm

screw.

- 30 mm or above: Install using a separate hanger.

• When installing the wall mount, check the positions of the wooden

studs using a stud finder. Then, fasten the screws on at least two

Punching Guide

separate studs before proceeding.

Wall mounting anchor

• When installing the product on wall material not designated, install

the product so that each location can withstand the pull out load of

70 kgf (686 N) and shear load of 100 kgf (980 N) or above.

• Use the Ø 8 mm drill bit for concrete and hammer (Impact) drill.