Table of Contents
Advertisement
USB connection
Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
•
General
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer.
However, if the device doesn't support it, it may not work properly.
In that case, connect the device to a different HDMI port or change the
TV's HDMI ULTRA HD Deep Colour setting to Off.
• Supported HDMI Audio format :
DTS (44.1 kHz, 48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
(Depending on model)
12
Slim remote control
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace coin batteries, turn the battery cover counterclockwise by
using a coin. Take the battery cover off and insert the battery (CR2032)
facing forward
turn it clockwise to close. To remove the coin batteries, perform the
installation actions in reverse.
HDMI ULTRA HD Deep Colour :
Make sure to point the remote control toward the remote control sensor
on the TV.
A
box to the universal remote control for your TV.
- Pressing and holding the
- Pressing and holding the
. Put the battery cover on the remote control and
• In Analogue TV and some countries, some remote
control buttons may not work.
STB
PWR
BACK
EXIT
(POWER) Turns the TV on or off.
You can turn your set-top box on or off by adding the set-top
Adjusts the volume level.
Scrolls through the saved programmes.
(MUTE) Mutes all sounds.
button accesses the Accessibility menu.
Returns to the previous level.
* Clears on-screen displays and returns to last input viewing.
(HOME) Accesses the Home menu.
(INPUT) Changes the input source.
button displays all the lists of external
inputs.
A
Advertisement
Table of Contents
