Tools You Will Need - LG 65WT980H Manual

Provided item
Wall mount
Wall mounting screw
Ø 5 x L65
Wall mounting screw for wood
Ø 3 x L18
• Check the material of the wall and the thickness of the finishing.
• Use the Wall mount anchor for wall material of concrete, light
concrete, strong natural stone, soft natural stone masonry brick and
hallow block that do not crack.
Wall material Tools
Concrete Wall mounting
anchor, Wall
Brick
mounting screw,
Natural stone
Ø 3/6/8 mm
Drill bit
Metal Panel
Plywood
Wall mounting
EPS Panel
screw, Ø 1.8 mm
Plasterboard +
Drill bit
Plywood
6
Punching Guide
Wall mounting anchor
Wall width
70 mm
30 mm
Penetrate the wall
30 mm
• When installing on a gypsum board or medium-density fiberboard
(MDF) wall, fasten the screws to the wooden pillars that support the
wall. If there are no wooden pillars, check the distance from the inner
wall before installing.
- 30 mm or below: Install directly on the inner wall using a 65 mm
screw.
- 30 mm or above: Install using a separate hanger.
• When installing the wall mount, check the positions of the wooden
studs using a stud finder. Then, fasten the screws on at least two
separate studs before proceeding.
Stud
• When installing the product on wall material not designated, install
the product so that each location can withstand the pull out load of
70 kgf (686 N) and shear load of 100 kgf (980 N) or above.
• Use the Ø 8 mm drill bit for concrete and hammer (Impact) drill.

Tools you will need

• Phillips head + driver (manual or motorized), Ø 3/6/8 mm Drill bit,
Level, Stud finder, Drill
Wall
Wall mount