Rework jigs and stencils
The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-424; RM-564. For the correct use of the service devices, and the best effort of workbench
setup, please refer to various concepts.
Page 2 –8
Figure 3 Coupler setting for SA-131
RJ-160
RJ-160 is a rework jig used when servicing the WCDMA duplexer
(Z7540). It is used together with the ST-55 stencil.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Service Tools and Service Concepts
Rework jig
RM-424; RM-564
Issue 1