Honda TRX 250EX 2007 Owner's Manual page 104

3. Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is harmf ul to the environment.
Add Engine Oil:
1. Check that the drain plug sealing washer is in good condition. If
necessary, replace the sealing washer.
2. Reinstall the oil drain plug and tighten it to the specified torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
3. Fill the crankcase with the recommended grade oil approximately:
1.7 US qt (1.6 )
4. Reinstall the oil filler cap/dipstick.
5. Start the engine and let it idle for 3 5 minutes.
6. Stop the engine and check the oil level. Make sure the oil is between
the upper and lower level marks on the oil filler cap/dipstick. If
necessary, add more oil but do not overfill.
7. Check that there are no oil leaks.
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
156 ).
−
Engine Oil
Servicing Your Honda
95