Tilt Support Lever For Power Trim And Tilt Model; Cowling Lock Lever (Turn Type) - Yamaha FL300A Owner's Manual

Components
TIP:
Consult your Yamaha dealer about changing
the setting.
EMU35030
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
48
EMU35053

Cowling lock lever (turn type)

To remove the top cowling, turn the cowling
lock levers at the front and side to release
them and lift off the cowling. Reverse this
procedure when reinstalling the top cowling.
When installing the cowling, align the 3 posi-
tions of the grommets to fit the cowling in the
rubber seal.
ZMU05824
ZMU05852
ZMU05853