Engine Synchronization Indicator; Overheat Alert; Low Oil Pressure-Alert - Yamaha FL300A Owner's Manual

Instruments and indicators
EMU42301

Engine synchronization indicator

In twin and triple types, this indicator appears
while the engines are under engine synchro-
nization control. It goes off when engine syn-
chronization control is released. For quad
type, this indicator does not appear.
EMU41680

Overheat alert

If the engine temperature rises too high while
cruising, the pop-up window will appear.
Press the " " (set) button to change to nor-
mal display, and the overheat-alert indicator
will start to blink. The engine speed will auto-
matically decrease to about 2000 r/min.
52
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01592
NOTICE
ZMU07237
Do not continue to run the engine if the
●
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
●
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU41690

Low oil pressure-alert

If the engine oil pressure drops too low, the
pop-up window will appear. Press the "
(set) button to change to normal display, and
the low oil pressure-alert indicator will start to
blink. The engine speed will automatically
decrease to about 2000 r/min.
ZMU07238
ZMU07239
"
ZMU07240