Bosch Exxcel WVD24520GB Operating And Installation Instructions page 10

Programme status display
Low water pressure
* Overdosage
10
Display
Other displays at this location:
24th* Finish in time
-0- End of programme or
- - -
End of programme without
final spin or
PAUS Pause
n
Door can be opened
OPE
F:16* Fault displays
Rinse cycle
Door open
}
Pause
H
* Example of the display
The first row of symbols and the progress bar below
form the programme status display. The progress bar
consists of a frame and several segments.
When the programme has started, the almost empty
bar is displayed which fills up with segments from left
to right while the programme is running.
The symbols indicate the programme section which is
running.
At the end of the programme all symbols have gone
out and the progress bar is full.
The automatic system detects the press of water
supply and displays
The automatic safety system detects excessive froth in
the appliance due to a highly frothing detergent or an
overdosage. This is indicated in the display field by the
* symbol. Dispense less detergent for the next wash
with similar items of washing (same degree of soiling
and wash load).
Overdosage of detergent may cause excessive froth
formation and impair the washing and rinsing results.
A rinse cycle is automatically run.
Notes
Selected finish in time
See page 49
Not on if there is no Rinse cycle
and additional rinse cycle was
not selected
On if the door can be opened
during "Pause'' period
On if the programme in pause.
if the water pressure is low.