Kubota F2890E Operator's Manual page 12

SAFE OPERATION
Careful operation is your best insurance against an accident. Read and understand this section carefully before operation.
All operators, no matter how experienced they may be, should read this and other related manuals before operation of the
machine or any implement attached to it. It is the owner's obligation to instruct all operators in safe operation.
This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety
instructions could result in serious injury or death.
1. BEFORE OPERATING
1. Know your equipment and its limitations. Read,
understand and follow all instructions in this manual
before attempting to start and operate the machine.
2. Pay special attention to the safety labels on the
machine and mower.
3. KUBOTA recommends the use of a Roll Over
Protective Structures (ROPS) and seat belt in almost
all applications. This combination will reduce the risk
of serious injury or death, should the machine be
upset.
The machine is equipped with a foldable ROPS, which
may be temporarily folded down only when absolutely
necessary for areas with height constraints.
(There is no operator protection provided by the ROPS
in the folded position. For operator safety the ROPS
should be placed in the upright and locked position
and the seat belt fastened for all other operations.)
If the ROPS is loosened or removed for any reason,
make sure that all parts are reinstalled correctly before
operating the machine.
Never modify or repair a ROPS because welding,
bending, drilling, grinding, or cutting may weaken the
structure.
If any structural member of the ROPS is damaged,
replace the entire structure at your local KUBOTA
Dealer.
(1) ROPS
(2) Seat belt
SAFE OPERATION
4. Always use the seat belt when the ROPS is upright. Do
not use the seat belt without a ROPS being upright.
Check the seat belt regularly and replace if frayed or
damaged.
5. Never wear loose, torn, or bulky clothing. It may catch
on moving parts or controls, leading to the risk of
accident. Safety boots or shoes, eye and hearing
protection, gloves, dust mask, etc. are recommended.
6. Do not wear radio or music headphones while
operating the machine.
Safe operation requires your full attention.
7. Carefully check the vicinity before operating machine
or any implement attached to it. Clear the work area of
objects (wires, rocks, etc.) that might be picked up and
thrown. Check for overhead clearance which may
interfere with a ROPS.
8. Do not operate machine or any implement attached to
it while under the influence of alcohol, drugs, or other
substances or while fatigued.
9. Check brakes, and other mechanical parts for faulty
adjustment and wear. Replace worn or damaged parts
promptly. Check the tightness of all nuts and bolts
regularly. (For further details, see "MAINTENANCE"
section.)
10. Keep the machine and attachments in good operating
condition and keep safety devices in place and in
proper working condition.
11. Do not modify the machine. Unauthorized modification
may affect the function of the machine, which may
result in personal injury.
12. Keep all shields and guards in place. Replace all
missing or damaged items for your safety.
13. Never allow any bystanders around or near machine
during operation.
Be sure the area is clear of other people before
mowing.
Stop machine if anyone enters the area.
14. Before allowing other people to use your machine,
explain proper operation to them and have them read
this manual before operation.
15. Never allow passengers or non-qualified operators on
the machine at any time. You must operate the
machine from the seat only.
16. In addition to the design and configuration of
equipment, hazard control and accident prevention
are dependent on the awareness, concern, and
prudence of personnel involved in the operation,
transport, maintenance of facilities.
1
-