Kubota F2890E Operator's Manual page 5

Abbreviations
2WD
4WD
API
ASTM
fpm
Hi-Lo
HST
m/s
PTO
RH/LH
F&R
ROPS
rpm
r/s
SAE
SUPER UDT
This machine is designed solely for use in customary grass cutting operation. Use in any other way is considered as contrary
to the intended use. Compliance with and strict adherence to the conditions of operation, service, and repair as specified by the
manufacturer, also constitute essential elements of the intended use.
This machine should be operated, serviced, and repaired only by persons who are familiar with its particular characteristics and
who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognized regulations on safety and occupational medicine, and all road
traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or
injury.
manufacturer or distributor of the machine
the model designation of the machine
the name or type of publication
the part number or publication number by which the
manual may be ordered
the date of issue
the publication date
the language in which the manual is written
ABBREVIATION LIST
2 Wheel Drive
4 Wheel Drive
American Petroleum Institute
American Society for Testing and Materials, USA
Feet Per Minute
High Speed-Low Speed
Hydrostatic Transmission
Meters Per Second
Power Take Off
Right-hand and left-hand sides are determined by facing in the
direction of forward travel
Front and rear sides are determined by facing in the direction of
forward travel
Roll-Over Protective Structures
Revolutions Per Minute
Revolutions Per Second
Society of Automotive Engineers, USA
KUBOTA Original Transmission hydraulic fluid
Intended use
Definitions
Kubota Corporation
F2890E, F3090, F3890
Operator's Manual
K3655-6292-1
26 June 2013
6 November 2018
English