Walker Edison AF30BON Assembly Instructions Manual

Hide thumbs

page of 34

/ 34
Bookmarks

Quick Links

Download this manual

Item # : AF30BON

Assembly Instructions

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com

Revised 27/05/2020 (L)

Walker Edison

2020 b

P.1

Summary of Contents for Walker Edison AF30BON

Page 1 Item # : AF30BON Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 27/05/2020 (L) Walker Edison ® © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved.
Page 2: General Assembly Guidelines
Concealed hinges are three-way adjustable. Horizontal In-and-Out Vertical by screw adjustment by loosening the hinge-arm Via slots in the mounting mounting screw or via cam plate or via cam adjustment adjustment © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
Page 4: Hardware List
Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. © Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Page 5 Step 1 Insert Wooden dowel (A) into parts (8,11) ,then secure Cam bolt (B) into parts (2,20) with Philips head screwdriver as per diagram. © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved.
Page 6 Step 2 Insert Wooden dowel (A) into parts (3,4,5) ,then secure Cam bolt (B) into parts (3,4,5) with Philips head screwdriver as per diagram. © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved.
Page 7 Pick up the slider arm (U) and separate the slide Runner for the following Steps. Extend the Slide .Runner all the way forward,press the plastic release lever of the alider arm up and pull the Slide Runner Complete out . © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved.
Page 23 Step 19 Using Screw (L) attach Europe Hinge (P) to part (13),Hinge (S) to part (1) with Philips head screwdriver as per diagram. © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved. P.23...
Page 25 If the gap between the part (1) and part (8) need to be adjusted, please first loosen the screws fixing hinge (S) to the part (1).Finally adjust the part (8) up or down, and then lock the hinge (S). © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved. P.25...
Page 31 Note :If the drawer does not go in smoothly .Press or lift the plastic release lever .Pull out the slider bracket from the slider arm then re-assembled the drawer until they were going in smoothly well . © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved. P.31...
Page 32 Make sure you place the shelf support pins (Q) in the same level. So the shelf is not titled .Put part (12) into unit as per diagram. Tilt and rest the adjustable shelf(12) onto the shelf support pins . © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved. P.32...

Walker Edison AF30BON Assembly Instructions Manual

Quick Links

Related Manuals for Walker Edison AF30BON

Summary of Contents for Walker Edison AF30BON

Page 2: General Assembly Guidelines

Page 3: Parts List

Page 4: Hardware List