Page 5
Insert bolt (B) into part (2), attach part (A) to part (2) using screw (F) with a screwdriver. Repeat this step two more times to complete the legs. Attach part (2) to part (3), then insert and secure half moon washer (C) and nut (D) to part (3) and use wrench (G) to tighten.
Page 6
Attach part (2) to part (1) using bolt (E) with hex key (H). Place plastic cover (J) over holes as per diagram.
Need help?
Do you have a question about the AF30EMCT and is the answer not in the manual?
Questions and answers