Table of Contents
Advertisement
Electromagnetic Flowmeter BFM921
4.2 Setup menu
Setup menu provides access to flowmeter configuration and can be accessed by pressing Enter button from
Main menu and entering appropriate password. There are three levels of acces to flowmeter. Passwords can
be changed in Setup menu/General/User access. In the following tables, settings requiring Calibration access
are marked as underlined.
Access level
User
Calibration
Service
Table 3 : User access
4.2.1
General
Level 1
About device
Language
Backlight
Contrast
Startup screen
Display
Aux item
Time
Date
Date & time
Date format
Change basic password
User access
Change calibration password
Restore calibration points
Restore other settings
Factory settings
Restore all settings
18
Default password
00000
10000
Only for qualified service
personal.
Setup menu/General
Level 2
Basic information about device such as serial number,
SW/HW versions and pipe diameter can be displayed
on screen.
User can switch flow meter language in this menu.
Display backlight can be set on or off in this menu.
Configuration of display contrast.
User can specify which screen of main menu should
be displayed after flowmeter startup.
User can choose from various types of measured flow
to display as bottom item on Overview screen in main
menu.
Date, time and date format can be changed here. Flow
meter features backup voltage source to date and
time backup in case of power outage.
Flowmeter user acces control.
User can restore flowmeter settings to factory
configuration here.
Table 4 : General settings
Description
Operation manual
BASI
Advertisement
Table of Contents
