Under The Lid Of The Flowmeter Case - BASI BFM921 User Manual

Electromagnetic Flowmeter BFM921 BASI
3.3.2

Under the lid of the flowmeter case

Power supply voltage terminal, fuse holder
Connect appropriate supply voltage to pluggable terminal block. For more information please refer to chapter
Electrical connection.
I/O interface terminals
Connect desirable input or output to pluggable terminal blocks. Frequency, impulse and status outputs are
galvanically connected to each other (sharing common ground – COM), and galvanically isolated from other
electronic circuits of flowmeter. For more information and configuration of input and outputs please refer to
chapter Inputs and outputs configuration.
USB connector
Flowmeter configuration can be changed by remote commands. For more information please refer to chapter
USB/RSR232.
Coils and electrodes terminal
Please connect coil, electrodes to pluggable terminal block.
12 Operation manual