Preparing For Start Up; Safety Precautions; Safety Symbols Used On The Equipment; Inspecting Contents Of The Package - BASI BFM921 User Manual

Electromagnetic Flowmeter BFM921

3 Preparing for start up

3.1 Safety precautions

The instrument has been designed according to EN 61010-1:2011. Safety is ensured by the design and by the
use of specific component types. Manufacturer is not liable for the damage caused by not following
instructions present in this manual or modification of the construction or replacement of parts with non-
original ones.
Caution!

Only a competent person may connect the flowmeter to the mains power supply.

To prevent accidents, connect main power only after all other wiring has been
completed.

Use only specified voltage and frequency for user flow meter version.

Take national applicable laws and rules into account.
3.1.1

Safety symbols used on the equipment

3.2 Inspecting contents of the package

Basic package includes the following items:

Flanged sensor

Electronic Transmitter (integral or remote)

Spare fuse

Operating manual.

Calibration certificate

Software FlowAssistant

USB A-B cable
The flowmeter is delivered ready for use after connecting to the power supply. Please check that it has been
correctly installed according to chapter Mechanical before turning power on. Only a power supply with the
appropriate voltage and frequency must be used, see ordering information in chapter "Power supply".
10
Warning, reference to the documentation
Lucy286
Operation manual
BASI