Name Of Room - Toshiba RB-RWS20-E Installation Manual

Lite-Vision plus Remote Controller
To adjust the clock
Clock
Date
Month
Year
Hour
Minute
Return Fix
–
Room A
Cool
Mode Fan Speed
NOTE
The available date range is from January 1

2. Name of room

Set the name of the room or place where the remote controller is installed. (Operations of the air conditioner are
possible without this setting.)
Initial setting(1/2)
1.Clock
2.Name of room
3.Screen contrast
4.Backlight
5.Key lock
Return
ABCDE Z & / : · uvwxy
(1)
FGH I J abcde z–+!?
KLMNO f g h i j 12345
PQRST klmno 6789
U W X Y p q r s t . # ( )
Return Set
01
01
2010
00
00
+
12:00
st
, 2010 to December 31
Set
0
Del
Fix
1
Push the [
"1. Clock" on the "Initial setting" screen,
then push the "
button.
2
Push the [
the date, month, year, hour, and minute.
Push the "
+" [ F2] button to set the value.
3
Push the [
The clock display appears on the upper right of the
screen.
• The clock display blinks if the clock setting has
been reset due to power failure or other cause.
st
, 2099.
1
Push the [
"2. Name of room" on the "Initial setting"
screen, then push the "
F2] button.
2
Set the name of the remote controller.
Enter the characters of the name in the screen
(1).
Move the cursor to select the character with the
∧
[ ] / [
"
F2] button (the selected character is highlighted),
then push the [
Name of the remote controller appears.
Up to 16 characters can be entered for Name of
room.
– 12 –
Installation Manual
∧ ∨
] / [ ] button to select
Set" [
Set
∧ ∨
] / [ ] button to select
-" [ F1] / "
–
MENU] button.
∧ ∨
] / [ ] button to select
Set
∨
] button and
←" [
F1] / "
MENU] button.
F2]
+
Set" [
→" [