Parameter Management; Parameter Backup; Data Recovery - Digital Dream DM500T3 User Manual

5.8 Parameter Management

5.8.1 Parameter revise
Conditions:
• Controller is in READY status;
• The screen go to "Para page"
Operation:
• Press the key
• Use the up and down keys to select the parameter you want,and press key
new data.After that press the key
• Before changing the value,if the system need you to type in the passport just do it.

5.8.2 Parameter Backup

Conditions:
• Controller is in READY status;
• The screen go to "Para page"
Operation:
• Insert U-disk to the controller
• Press
Pls note the backup data all saved into the "setting" file at the root directory of U-disk.

5.8.3 Data Recovery

Conditions:
• Controller is in READY status;
• The screen go to "Para page"
Operation:
• The Backup data should be save into the Setting file of the root directory of U-disk
• Press
Pls note the backup data should be saved into the "setting" file at the root directory of U-disk in Advance.
Digital Dream Motion Controller
and
Parameter Kinds
to save the new value.
and ,type in the admin password,and enter.
Para Backup U
and ,type in the admin password,and enter
Restore Para U
Page -34
then you will enter into the Parameter Page.
to type in the
DM500 User's Manual