Sunny Health & Fitness SF-B121021 User Manual page 16

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-
8669).
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove the preassembled 4 Carriage Bolts
(No. 6), 4 Flat Washers (No. 7), 4 Spring
Washers (No. 8), 4 Acorn Nuts (No. 9) and 2
Shipping Tubes (A), from the Main Frame
(No. 1) with the Spanner (No. 42).
Attach the Front & Rear Stabilizer (No. 2 &
No. 12) to the Main Frame (No. 1) using 4
Carriage Bolts
4 Spring Washers (No. 8) and 4 Acorn Nuts
(No. 9) that were just removed. Tighten and
secure with the Spanner (No. 42).
Loosen and pull out the L Shaped Knob (No.
16) from the Main Frame (No. 1). Insert the
Seat Post (No. 18) into the Main Frame (No.
1), and lock with L Shaped Knob (No. 16).
STEP 2:
First, insert the L Shaped Knob (No. 16) into
the front tube of the Main Frame (No. 1). Turn
clockwise to tighten all the way. Then turn
counter-clockwise to loosen the L Shaped
Knob (No. 16) enough to insert the Handlebar
Post (No. 25).
Insert the Handlebar Post (No. 25) to the front
tube of Main Frame (No. 1), adjust to the
proper height, and insert and tighten L Shaped
Knob (No. 16) to secure.
Attach the Handlebar
Handlebar Post (No. 25). Insert L Shaped
Knob (No. 27) and Flat Washer (No. 32) and
tighten to secure.
Attach the Seat (No. 28) to the Seat
Horizontal Post (No. 19). Tighten and secure
with the Spanner (No. 43).
NOTE: Before exercise, please make sure the
Seat (No. 28) is tightened to the Seat
Horizontal Post (No. 19).
15
(No. 6), 4 Flat Washers (No. 7),
(No. 26) to the