Advertisement
Pin down one wing side as the marked position as per plan, cut the sheeting as close to the wing as
practical,
Start sheeting from the sub leading edge backwards, and glue sheeting to formers.
Place leading edge and sand to shape, make up wing tips and sand these to shape and to match the
wing
Place wing joiners and dowels, do not glue yet
Open up the bottom sheeting to place the retract units in your kit they will be in the forward bay,
unless you want to have the more scale position, it will make rotating more difficult.
The leg and wheel openings are cut.
Cut out the landing gear hatches and glue to the fuselage
Modellmarkt24.ch
Advertisement
