RBC kits F35 Manual page 10

Now carefully start sheeting the fuselage with the 2mm balsa sheeting, you might need to sand or
plane the edges to obtain a good fit on each other.
Best is to use ca for gluing to the formers and a well sanding balsa glue, like ulu hart between the
strips.
You need 2x12 strip also, cut the rudder openings.
Check for good fit of the rudders. And place all your wiring for battery retracts etc.
When top sheeting is done you can carefully release the fuselage from the build support and turn it
over, we use a model stand for easy handling see https://www.rbckits.com/shop/model-stand-
medium.html
Modellmarkt24.ch