Table of Contents
Advertisement
Problem
Solution
"No signal"
• Press INPUT and make sure that
error message is
you have selected the correct
displayed.
input for the device or service
you are trying to use.
• If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
After Auto
• Reception can vary by channel
Channel Search,
depending on the broadcast
there are no
power level of a given station.
channels.
Contact your cable or satellite
TV provider.
• Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
• Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
When I press
• Turn on the device. Your TV
INPUT, I cannot
automatically detects and
select my
displays which video jacks have
device (it is
devices connected to them
grayed out).
when the devices are turned on.
• Turn off Auto Input Sensing. See
Turning Input Sensor on or off
on page 66.
One or more
• Make sure that the channels are
channels do not
not blocked. See
display.
parental control levels
page 59.
• Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See
page 55.
• If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
• Press INPUT and make sure that
you have selected the correct
input for the device or service
you are trying to use.
• If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
Checking the digital signal
strength
Password is lost.
• Enter 9999 to access parental
controls, then set a new
password. See
changing the password
page 57.
Setting
on
Hiding channels
on
on page 57.
Setting or
on
www.insigniaproducts.com
Problem
Solution
Some settings
• If a setting is grayed, the setting
cannot be
is not available in the current
accessed.
video input mode (for example
TV mode). Change to a different
video input source. See
Selecting the video input
source
TV cabinet
• When the TV is in use, the
creaks.
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
The control
• Make sure that the Button Lock
buttons do not
option is set to Off. See
work.
the power button on your TV
page 61.
• Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps
• Make sure that the sleep timer
turning off.
is not turned on. See
sleep timer
A retail banner
• You selected Store Display
is displayed.
Mode when you ran the Easy
Setup wizard. Run the Easy
Setup wizard and select Home
User Mode on the Viewing
Environment screen. See
Customizing TV settings
page 70.
19" 720p 60Hz LED TV
on page 40.
Locking
on
Setting the
on page 65.
on
75
Advertisement
Table of Contents
