Table of Contents
Advertisement
Using INlink
INlink lets you control HDMI CEC-compatible devices
connected to the HDMI jacks on your TV using the
remote control that came with your TV.
Note
If your remote control has media control
buttons, you can use your remote control to
control playback. See
page 15.
If your remote control does not have media
control buttons, use the remote control that
came with the device to control playback.
To use INlink, you must set the INlink Control setting
on the INlink menu to On.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
• The connected device's HDMI CEC feature
must be turned on.
• If you connect an HDMI device that is not
HDMI CEC-compatible, none of the
INlink Control features work.
• Depending on the connected HDMI
device, some INlink Control features
may not work.
This section covers:
• Turning INlink on or off
• Turning Device Auto Power Off on or off
• Turning TV Auto Power On on or off
• Turning Audio Receiver on or off
• Displaying a list of INlink-compatible devices
• Selecting an INlink-compatible device
• Opening an INlink-compatible device's root menu
NS-RC4NA-18
on
www.insigniaproducts.com
Turning INlink on or off
1 Press MENU.
2 Press
or
to highlight SETTINGS, then press
or ENTER.
3 Press
or
to highlight INlink, then press ENTER
or .
4 Press
or
to highlight INlink Control, then
press ENTER or .
5 Press
or
to highlight On or Off, then press
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
19" 720p 60Hz LED TV
43
Advertisement
Table of Contents
