Table of Contents
Advertisement
NL Home Connect
a The device is connecting
with the Smart Energy system
(energy manager).
aWhen the display shows and
is displayed, the device is
successfully connected to the
energy manager.
If the device is to be started by the
4.
Smart Energy system (energy
manager), activate Flexstart.
→ "Activating Flexstart", Page 46
Activate Flexstart
Activate the Flexstart so that your
Smart Energy system (energy
manager) can start your device when
your own PV system generates
sufficient energy or the electricity
tariff is low.
Required: The Smart Energy system
(energy manager) can only start the
device when the Smart Energy
system (energy manager) and the
device are connected.
Set the desired programme.
1.
Press - Ready in +
2.
desired time period.
Press Start/Refill
3.
Press Control via app
4.
a The display shows and the
Flexstart is activated. The device is
waiting for a remote start via the
Smart Energy system (energy
manager).
aWhen the display shows the weather
If the time goes to eg 8 h, the
Smart Energy system (energy
manager) has set a time at which
the device will start.
aWhen the Smart Energy system
tem (energy manager) the
appliance does not start within
the set time, the appliance starts
the program independently before
46
and set the
.
.
expiry of the set time period. The
program ends when this time
frame is over.
Onote
The Flex Start is deactivated
for safety reasons under the
following conditions:
¡ Press Start/Refill
¡ Open the door.
¡ Turn off the device.
¡ Power cut.
15.5 Activate WiFi on the device
Remark: The energy consumption
increases compared to the values
indicated in the consumption value
tables when Wi-Fi is activated.
Approx. 3 s onControl via app
1.
know.
Set program to position 4.
2.
a The display shows Con reflected
to give.
Press Start/Refill
3.
the display on displays.
aWiFi is activated.
Remark: The device does not turn off
automatically when WiFi is activated.
15.6 Deactivate WiFi on the
device
On for at least 3 seconds Operate
1.
via app
to press.
Set program to position 4.
2.
a The display shows Con reflected
to give.
Press Start/Refill
3.
the display OFF displays.
aWiFi is deactivated.
.
pressure-
until
until
Advertisement
Table of Contents
