Malfunction
burns.
flashes.
All other error codes. Malfunction
Device not working.
Program does not start.
Cause and Troubleshooting
Start the program pump down.
▶
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press Start/Additional
4.
.
to fill
Door is not closed.
Close the door.
1.
To start the program, press Start/Additional
2.
.
to fill
Please contact customer service.
▶
→ "Service", Page 68
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
Fuse is defective.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or
▶
other devices are functioning.
Start/Refill
Press Start/Refill
▶
Door is not closed.
Close the door.
1.
To start the program, press Start/Additional
2.
.
to fill
Child lock is activated.
→ " Deactivate child lock", page 43
▶
is activated.
- Ready in +
Check if - Ready in +
▶
→ "Keys", Page 23
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press Start/Additional
4.
.
to fill
Troubleshooting NL
was not pressed.
.
is activated.
59