Dosing Detergent And Care Agent; Starting The Program; Soaking The Laundry; Adding Laundry - Siemens WM14VMH5NL User Manual And Installation Instructions

Fold the dosing aid down and click
3.
into place.
Slide in the detergent drawer.
4.
13.7 Dosing detergent and
care agent
Comments
¡ Take the information about the un-
subject security → Page 4 and
avoid material damage
→
Page 11 be aware of your appli-
to use safely.
¡ Use the dosing aid for liquid
Do not use gel-type detergents,
washing powder, switched on
prewash or ready-in time.
Required: Inform yourself about the
optimum dosage for detergents and
care products.
Pull out the detergent drawer.
1.
Fill with detergent.
2.
→
"Detergent drawer", Page 20
If desired, fill with a care product.
3.
Slide in the detergent drawer.
4.

13.8 Starting the program

Remark: If you want to change the
time until the program end, first set
the ready-in time.
on Start/Refill
▶
to press.
The Ministry in essence NL
a The drum rotates and a
load detection, which can take up to
2 minutes, after which the water
flows into the appliance.
a The display shows whether the program
duration or the ready-in time is
displayed.
a After the program end, it shows
display: -0-.
13.9 Soaking laundry
Remark: No additional detergent is
required. The soapy water is then
used for washing.
Start the program.
1.
To pause the program, after
2.
approx. 10 minutes, press Start/
Refill
To resume the program after the
3.
desired soaking time, press
Start/Refill

13.10 Adding laundry

Remark: Take the information on the
topic of safety → Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
Press Start/Refill
1.
The appliance pauses and checks
whether it is possible to add or
remove laundry. Note the
program status.
Remove or refill laundry.
2.
Close the door.
3.
Press Start/Refill
4.
.
.
.
.
41