Installing Air Inlets; Fig. 46: Installing The Air Inlets; Table 42: Tightening Torque (72020) - ABB HT607772 Operation Manual

Operation Manual / TPS44-H.. - TPS52-H..
10 Dismantling and fitting / 10.18 Installing air inlets
10.18

Installing air inlets

Fig. 46: Installing the air inlets
Product
TPS44
TPS48
TPS52
Table 42: Tightening torque (72020)
1. Fit the new O-ring (81010 / 82010) to the filter silencer (81000) or the air suction
branch (82000).
2. Manually position the filter silencer (81000) or the air suction branch (82000) on the com-
pressor casing (72000).
3. Fit the V-clamp (72020).
4. Align the casing position of the filter silencer (81000) or the air suction branch (82000) to
the marking.
5. Tighten the V-clamp (72020).
© Copyright 2021 ABB. All rights reserved.
Size Tightening torque [Nm]
M10
M10
M10
HZTL4037_EN
30 Nm
30 Nm
30 Nm
Rev.G June 2021