Installing The Gas Outlet Casing; Fig. 45: Fitting The Gas Outlet Casing; Table 41: Tightening Torque (51008) - ABB HT607772 Operation Manual

Operation Manual / TPS44-H.. - TPS52-H..
10 Dismantling and fitting / 10.17 Installing the gas outlet casing
10.17

Installing the gas outlet casing

Fig. 45: Fitting the gas outlet casing
Product
TPS44
TPS48
TPS52
Table 41: Tightening torque (51008)
1. Coat thread of studs (51008) with high-temperature grease.
2. Align the casing position of the gas outlet casing (61001) to the marking.
3. Position the gas outlet casing and fit with two hexagon nuts (51009) in the upper area.
4. Fit the remaining hexagon nuts (51009), then tighten all the screws. Observe tightening
torque.
© Copyright 2021 ABB. All rights reserved.
Size
M8
M8
M10
HZTL4037_EN
Tightening torque [Nm]
25 Nm
25 Nm
50 Nm
Rev.G June 2021