Smeg PGF30T-1 Instructions For Use Manual page 19

Instructions for the user
5.6.1 Heating
Setting the knob to a higher value than the
original value starts the heating phase.
While a cooking zone is heating the display
alternates between the adjacent symbols
and darkness (roughly every second).
5.6.2 Cooling
Adjusting the knob to setting that is lower
than the initial one will start the cooling
stage. While a cooking zone is cooling the
display alternates between the adjacent
symbols and darkness (roughly every
second).
5.6.3 Reaching the temperature
When the cooking zone reaches the set temperature, the adjacent
symbol is displayed continuously for about 5 seconds.
5.6.4 Alternation of symbol display
While the temperature level is being adjusted, and for about 5 seconds after the
last adjustment, the display shows the selected level (from 1 to 9). Then,
depending on whether the plate is to heat or cool, the sequences of zone
heating or cooling symbols are displayed. Once the temperature is reached, the
symbol , appears for about 5 seconds, after which the temperature level is
displayed.
51