Handlebar Switches - Yamaha TDM Twin 900 2008 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
odometer/tripmeter
1 two-digit error code.
If the odometer/tripmeter indicates
such an error code, note the code num-
2
ber, and then have a Yamaha dealer
check the vehicle.
3
CAUTION:
If the odometer/tripmeter indicates
4
an error code, the vehicle should be
checked as soon as possible in or-
5
der to avoid engine damage.
6
7
8
9

Handlebar switches

Left
will indicate a
ECA11520
1. Pass switch "
2. Hazard switch "
3. Dimmer switch "
4. Turn signal switch "
5. Horn switch "
1
2
3
4
5
"
"
/ "
/ "
"
3-8
EAU12347 Right
1. Engine stop switch "
2. Start switch " "
Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
1
2
/ "
EAU12350
"
EAU12400
/ "
" for the high
EAU12460
/ "
". When re-