Virtual Dolby (Qsurround) Setting - Sharp DV-L88 Operation Manual

DVD
DVD

VIRTUAL DOLBY (QSURROUND) setting

This function allows you to enjoy a "surround sound" effect when you are using
an analogue connection (using AUDIO OUT on the Player) to 2-channel audio
equipment (TV, etc.).
Preparation:
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the "COMPRESSION" setting in "AUDIO SETUP" to "OFF" (see page 56).
Refer to the table below about the types of audio format with which VIRTUAL
DOLBY (QSURROUND) works.
Types of audio recorded on the disc
Dolby Dolby
Digital Pro Logic
Use the following procedure to change the setting between "ON" and "OFF",
and the level for the VIRTUAL DOLBY setting.
1
Press FUNCTION during playback.
• The Function control screen appears.
2
Use ' or " to select
ENTER.
Dolby Digital MPEG Audio
2ch/Linear
Ver. 2.0/
PCM
DTS
✕ ✕
and then press
Using the Function Control
ON
DVD