To Charge The Battery Pack - Sharp DV-L88 Operation Manual

Important!
• Do not apply excessive force to the battery pack compartment cover when
opening it.
• Make sure that the battery pack is positioned correctly when you install it in
the Player. Positioning it wrong can cause malfunction.
• The battery pack needs time to initialize whenever you install it in the Player.
Wait for about three seconds after attaching it to turn on power.
• Remove the battery pack from the Player when you finish using it.

To charge the battery pack

Use the AC adapter that comes with the Player to charge the battery pack.
• Before charging the battery pack, make sure that the battery pack is firmly
installed in the Player. See "To install a battery pack in the Player" on
page 36.
1
Plug the AC cord into the power socket
of the AC adapter (1).
• Push the cord straight into the AC
adapter as far as it can go.
2
Plug the other end of the AC cord
into a household power outlet (2).
3
Plug the DC cord into the DC IN
jack on the rear of the Player (3).
Indicator Lamp
The Indicator lamp lights orange while charging
is in progress, and goes out when the battery
pack is fully charged.
Using the Battery Pack
1
2
For other
Southeast Asia
2
2
For Australia and
New Zealand
For Hong Kong
3