Viewing Images From An External Equipment - Sharp DV-L88 Operation Manual

Viewing Images from an External Equipment

Use the following procedure to set up the Player for use as a monitor for
viewing images from a VCR or camcorder.
INPUT
– VOLUME
OPERATE /DVD
TITLE FUNCTION
MENU ENTER
SETUP VIDEO ADJ.
ZOOM PROGRAM DISPLAY VIEW MODE
LCD ON/OFF
DVD VIDEO PLAYER
To view images from an external equipment
1
Connect the external equipment using the procedure on page 30.
2
Turn on the external equipment.
3
Turn on the Player.
4
Press INPUT/DVD to enter the INPUT
mode.
5
Press the play button of the external equipment.
• Power is not supplied from the Player to a connected camcorder.
• When not using the Player with external equipment, be sure to disconnect all
cables from the video input/output and audio input/output terminals.
• The Player goes into the Standby mode when no video signal is input for about 5
minutes in the INPUT mode.
+
SHIFT
RETURN
INPUT