Playing Dolby Digital (5.1 Channel), Dts And Mpeg Audio - Sharp DV-L88 Operation Manual

Connecting to Audio Equipment

Playing Dolby Digital (5.1 channel), DTS and MPEG audio

• Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround
processor or a Dolby Digital/DTS/MPEG Audio digital surround decoder to
your Player's optical digital jack provides richer, more powerful audio play.
• To use DTS digital surround, use the Disc Menu screen (page 99) or the
Function control screen (page 81) to select DTS audio.
DIGITAL OUT (OPTICAL)
Dolby Digital (5.1ch)/
DTS/MPEG Audio
processor or amplifier
After making the above connection
1
Set the " DIGITAL" in "AUDIO SETUP" to "BITSTREAM" (see page 58).
• To play a disc recorded with DTS, you need to use DTS processor or amplifier.
• This connection is not possible if the processor or amplifier to which you want to
connect does not have an optical digital input jack.
• Refer to the operation manual for the processor or amplifier for information about
connecting to it.
Optical digital cable
(commercially available)
To optical
digital
input jack
DIGITAL IN
COAXIAL OPTICAL