Using The Battery Pack; To Install A Battery Pack In The Player - Sharp DV-L88 Operation Manual

Using the Battery Pack

CAUTION
• Use only SHARP model "BT-L300S" battery pack with this Player.
Use of another battery may present a risk of fire or explosion.

To install a battery pack in the Player

1
Make sure that the Player is turned off and then unplug the DC cord.
2
To open the battery pack compartment cover, while pressing at the
mark, slide the cover forwards (1), and raise it upwards (2).
3
Slide the battery pack into Player's battery pack compartment in the
direction indicated by the arrow as far as it locks firmly with a click.
4
Slide the battery pack compartment cover along the ridges of the battery
pack at about 45° until the two tabs of the cover are at their original location
(1), and lower the cover to close it (2).
1
CAUTION
• When turning off the power, while using the battery pack, make sure to slide
the Player's OPERATE switch to "OFF".
1
2
2