Scanning With The Scan Button; Scanning To A Folder - Compaq C31000 User Manual

Scanning with the scan button

To perform a scan using the Scan button, complete the
following steps.
1 Place the document on the scanner glass, as
described in Positioning the Document above.
2 Press the Scan button.
3 Select the Scan To destination. Use the up and down
arrow buttons to cycle through the available choices.
For a full description of the scan destinations, see
below.
4 Press Start.
The C
perform the scan.
Note:
If you have not scanned any documents for 30 minutes, there
will be a delay of approximately one minute while the
scanner warms up.Otherwise, the scan will proceed
immediately.

Scanning to a folder

The first Scan To destination is your User Folder. This
is initially your My Pictures folder, located in your My
Documents directory. You can change your user folder
and default file type with the Settings Utility.
Note: Simply press the Scan button twice to scan your document to
your User Folder, using the settings you selected with the
Settings Utility.
Scanned file names
Once scanned, scanned files will be given the filename
of
number of the image scanned that day. For instance, the
second image scanned on August 5 would be named
Aug-05-002.JPG
3
1000 will then contact your computer and
, where
Month-Day-###.ext
.
indicates the
###
Scanning
•
•
35
•
•
•