Loading specialty papers
Load up to:
10 envelopes
10 greeting cards,
index cards, post-
cards, or photo cards
25 sheets of photo
paper or photocards
20 sheets of banner
paper
Note: Make sure you
select Banner or Ban-
ner A4 paper size in the
Printer Properties. For
help, see page 23.
10 transparencies
100 sheets of custom-
sized paper
25 iron-on transfers
•
•
22
Chapter 3
•
•
•
Make sure:
• The print side is facing you and the
paper guide is against the side of
the envelopes.
• The stamp location is in the upper
left corner.
• The envelopes are loaded vertically
against the right side of the sheet
feeder.
• The print side is facing you and the paper guide is
against the side of the cards.
• The cards are loaded vertically against the right side
of the sheet feeder.
• The glossy or coated side is facing you.
• The paper guide is against the side of the paper.
• You place the banner paper
behind the printer. Then
bring the unattached edge of
the first page over the
printer and into the sheet
feeder.
• The paper guide is against
the side of the paper.
• The rough side of the transparency is facing you
(smooth side down).
• The paper guide is against the edge of the
transparencies.
• The print side is facing you and the paper guide is
against the side of the paper.
• Your paper size fits within these dimensions:
- Width: 3.0 in. to 8.5 in. (76 mm to 215.9 mm)
- Length: 5.0 in. to 17.0 in. (127 mm to 432 mm)
• You load the iron-on transfers following the
instructions on the package.
• The paper guide is against the side of the iron-on
transfers.
Need help?
Do you have a question about the Compaq C31000 and is the answer not in the manual?