Locating A Hotspot; Maintenance - Omega Engineering OS1300 Series User Manual

3.5 Locating a Hotspot:

To find a hot spot, aim the thermometer outside the area of interest, then scan across with up and down motions until you
locate the hot spot. Turning on the laser will make for more precise targeting.
3.3 Locating a Hotspot:
To find a hot spot aim the thermometer outside the area of interest, then scan across with up and down motions until you
locate the hot spot. Turning on the laser will make for more precise targeting.
4)

Maintenance

1) Lens cleaning : blow off loose particles using clean compressed air. Gently brush remaining debris away with a moist
cotton cloth.
2) Case cleaning: clean the case with a damp sponge/cloth and mild soap.
Note: Do not use solvent to clean lens and do not submerge the unit into water or any other liquid.