Error Messages - Midtronics MDX-655P Instruction Manual

Error Message
BATTERY POWER TOO
LOW TO USE PRINTER.
CONNECT TO FULLY
CHARGED BATTERY
11.50 TO 16.00V
CONNECT TO
12V BATTERY
LOW INTERNAL AA
BATTERIES. REPLACE
AA BATTERIES SOON!
NON 12 VOLT SYSTEM
DETECTED
PRINTER DOOR OPEN.
CLOSE DOOR AND TRY
TO PRINT AGAIN
PRINTER OUT OF PAPER
REPLACE WITH THERMAL
PRINTER PAPER.
2.5 IN. DIA. MAX.
2.25 IN. WIDE MAX
QC DATA MEMORY FULL
PRINT RESULTS OR
CLEAR MEMORY.

Error Messages

Battery being tested has fallen below 9 volts.
Connect to a fully charged battery to use the
printer.
Tester is not connected to the battery
Internal AA batteries are low and need to be
replaced. See "Maintenance & Troubleshooting"
section.
System being tested is not 12-volts.
Door covering printer paper is not secure.
Printer is out of thermal paper. Replace with new
roll. See "Maintenance & Troubleshooting" section.
QC mode memory is full. Select QC mode from the
Options Menu to clear the memory.
18
• •
Interpretation
www.midtronics.com